| Standard |
Designation Title |
| IEC 60092-350 |
Part 350: Shipboard power cables - General construction and test requirements |
| IEC 60092-351 |
Part 351: Insulating materials shipboard and offshore units, power, control, instrumentation, telecommunication and data cables |
| IEC 60092-352 |
Part 352: Choice and installation of electrical cables |
| IEC 60092-353 |
Part 353: Single and multicore non-radial field power cables with extruded solid insulation rated voltage 1 kV and 3 kV. |
| IEC 60092-354 |
Part 354: Single -and three-core power cables with extruded solid
insulation rated voltages 6 kV (Um = 7,2kV) up to 30 kV (Um = 36 kV) |
| IEC 60092-359 |
Part 359: Sheathing materials shipboard power and telecommunication cables. |
| IEC 60092-376 |
Part 376: Cables control and instrumentation circuits 150/250 V (300 V) |
| IEC 60228 |
Conductors of insulated cables. |
| IEC 60331-11 |
Test electric cables under fire conditions – Circuit integrity – Part 11
Apparatus – Fire alone at a flame temperature of at least 750°C |
| IEC 60331-12 |
Test electric cables under fire conditions – Circuit integrity – Part 12
Apparatus – Fire with shock at a flame temperature of at least 830°C |
| IEC 60331-21 |
Test electric cables under fire conditions – Circuit integrity – Part 21
Procedures and requirements – Cables of rated voltage up to and including 0,6/1kV |
| IEC 60331-25 |
Test electric cables under fire conditions – Circuit integrity – Part 25
Procedures and requirements – Optical fibre cables |
| IEC 60331-31 |
Test electric cables under fire conditions – Circuit integrity – Part 31
Procedures and requirements fire with shock – Cables of rated voltage up to and including 0,6/1kV |
| IEC 60332-1-1 |
Test on electric and optical fibre cables under fire conditions. Part 1-1
Test vertical flame propagation a single insulated wire or cable - Apparatus |
| IEC 60332-1-2 |
Test on electric and optical fibre cables under fire conditions. Part 1-2
Test vertical flame propagation a single insulated wire or cable – Procedure 1 kW pre-mixed flame |
| IEC 60332-1-3 |
Test on electric and optical fibre cables under fire conditions. Part 1-3
Test vertical flame propagation a single insulated wire or cable – Procedure determination of flaming droplets/particles |
| IEC 60332-2-1 |
Test on electric and optical fibre cables under fire conditions. Part 2-1
Test vertical flame propagation a single small insulated wire or cable - Apparatus |
| IEC 60332-2-2 |
Test on electric and optical fibre cables under fire conditions. Part 2-2
Test vertical flame propagation a single small insulated wire or cable – Procedure diffusion flame |
| IEC 60332-3-21 |
Tests on electric cables under fire conditions . Part 3-21
Test vertical flame spread of vertically-mounted bunched wires or cables
– Category A F/R |
| IEC 60332-3-22 |
Tests on electric cables under fire conditions . Part 3-22
Test vertical flame spread of vertically-mounted bunched wires or cables
– Category A |
| IEC 60332-3-23 |
Tests on electric cables under fire conditions . Part 3-23
Test vertical flame spread of vertically-mounted bunched wires or cables
– Category B |
| IEC 60332-3-24 |
Tests on electric cables under fire conditions . Part 3-24
Test vertical flame spread of vertically-mounted bunched wires or cables
– Category C |
| IEC 60332-3-25 |
Tests on electric cables under fire conditions . Part 3-25
Test vertical flame spread of vertically-mounted bunched wires or cables
– Category C |
| IEC 60501-1 |
Power cables with extruded insulation and their accessories rated voltages from 1 kV (Um = 1,2 kV) up to 30 kV (Um = 36 kV) - Part 1:Cables rated voltages of 1 kV (Um = 1,2 kV) and 3 kV (Um = 3,6 kV) |
| IEC 60754-1 |
Test on gases evolved during combustion of electrical cables. Part 1: Determination of the amount of halogen acid gas. |
| IEC 60754-2 |
Test on gases evolved during combustion of electrical cables. Part 2:Determination of degree of acidity of gases evolved during the combustion of materials taken from electric cables by measuring pH and conductivity. |
| IEC 60811 |
Common test methods insulating and sheathing materials of electric cables. |
| IEC 61034-1 |
Measurement of smoke density of cables burning under defined conditions. Part 1: Test apparatus. |
| IEC 61034-2 |
Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements. |
